Applying I/Q Vector Modulation
R&S
®
SMW200A
417User Manual 1175.6632.02 ─ 16
3. To define the external analog signal, select "Source > Differential Analog I/Q
Input".
The dialog comprises the I/Q modulator settings, the optimized settings for wide-
band modulation and settings for enabling the analog and/or digital impairments.
The remote commands required to define these settings are described in Chap-
ter 13.18.8, "SOURce:IQ Subsystem", on page 1048.
For a description on the signal impairment functionality and settings for applying
non-linear effects, see:
● Chapter 5.3, "Impairing the Signal", on page 406
See user manual R&S
®
SMW-K540, R&S
®
SMW-K541 Envelope Tracking and
AM/AM, AM/PM Predistortion.
See user manual R&S
®
SMW-K544 User-Defined Frequency Response Correction.
I/Q Modulator Settings
To Next Page
Loading...
