General Instrument Functions
R&S
®
SMW200A
668User Manual 1175.6632.02 ─ 16
The "RF Connectors" dialog gives an overview of the mapping of the logical signals
to the connectors. You can change the signal to connector mapping of the global
connectors in the Global Connectors Settings dialog. The signal assignment to the
dedicated RF connectors LO IN/OUT or INST TRIG X is fixed.
Selecting a connector name accesses directly the related connector settings.
The dialog has a separate tab for each of the RF blocks.
2. Use the built-in Show Connector function to display the physical location of the
selected connector.
A blinking LED on the front/rear panel indicates the selected connector, too.
Configuring the Local and Global Connectors
To Next Page
Loading...
