DGS-6604 m show ip route
CLI Reference Guide
695
The following is sample output from the show ip route command when entered
without an address:
[160/5] The first number in the brackets is the administrative distance of the information
source; the second number is the metric for the route.
via 10.119.254.6 Specifies the address of the next router to the remote network.
0DT0H0M44S Specifies the last time the route was updated.
Vlan2 Specifies the interface through which the specified network can be reached.
Total Entries : Displays the total number of entries, and the total number of routes.
Field
Description
Switch# show ip route
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
area
* - candidate default
C 10.0.0.0/8 is directly connected, vlan10
O 10.50.71.253/32 [110/0] is a summary, Null, 0DT1H5M46S
C 11.0.0.0/8 is directly connected, vlan110
O E1 11.0.1.0/24 [110/1] via 11.50.71.200, vlan110, 0DT1H4M47S
C 12.0.0.0/8 is directly connected, vlan111
C 20.0.0.0/8 is directly connected, vlan111
O E1 20.0.1.0/24 [110/1] via 11.50.71.200, vlan110, 0DT1H4M47S
O IA 50.0.0.0/8 [110/2] via 10.50.71.253, vlan10, 0DT1H3M58S
B 121.0.0.0/24 [20/0] via 10.50.71.200, vlan10, 0DT1H5M35S
B 121.0.1.0/24 [20/0] via 10.50.71.200, vlan10, 0DT1H5M35S
B 121.0.2.0/24 [20/0] via 10.50.71.200, vlan10, 0DT1H5M35S
S 160.0.0.0/8 [1/0] via 10.50.71.200, vlan10
Total Entries: 12 entries, 12 routes
To Next Page
Loading...
