enable dos-protect
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1003
enable dos-protect
enable dos-protect
Description
Enables denial of service protection.
Syntax Description
This command has no arguments or variables.
Default
The default is disabled.
Usage Guidelines
None.
Example
The following command enables denial of service protection.
enable dos-protect
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...