CLEAR-Flow Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1102
disable clear-flow
disable clear-flow
Description
Disable the CLEAR-Flow agent.
Syntax Description
This command has no arguments or variables.
Default
CLEAR-Flow is disabled by default.
Usage Guidelines
When the CLEAR-Flow agent is disabled, sampling stops and the and all rules are left in the current
state. It will not reset actions that were taken while CLEAR-Flow was enabled.
Example
The following example disables CLEAR-Flow on the switch:
disable clear-flow
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on the BlackDiamond 10808 and BlackDiamond 12804 platforms only.
To Next Page
Loading...