show tunnel
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1461
show tunnel
show tunnel
Description
Displays system tunnel information.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
This command displays system tunnel information.
Example
The following command displays system tunnel information:
show tunnel
The following is sample output:
Name Type Flags
tunfour 6in4 10.20.30.40 => 10.10.10.10 U
tunfive2 6to4 10.20.30.40 => *.*.*.* D
Total tunnels: 2
Flags: (U) Up / (D) Down
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...