configure lldp transmit-interval
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
491
configure lldp transmit-interval
configure lldp transmit-interval <seconds>
Description
Configures the periodic transmittal interval for LLDPDUs.
Syntax Description
Default
30 seconds.
Usage Guidelines
N/A.
Example
The following command configures a transmittal interval of 20 seconds for LLDPDUs.
configure lldp transmit-interval 20
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
seconds Specifies the time between LLDPDU transmissions. The range is 5 to 32768.
To Next Page
Loading...