Extreme Networks ExtremeWare XOS - Configure Eaps Name

configure eaps name
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1133
configure eaps name
configure eaps <old_name> name <new_name>
Description
Renames an existing EAPS domain.
Syntax Description
Default
N/A.
Usage Guidelines
If you use the same name across categories (for example, STPD and EAPS names), Extreme Networks
recommends that you specify the identifying keyword as well as the actual name. If you do not use the
keyword, the system may return an error message.
Example
The following command renames EAPS domain “eaps-1” to “eaps-5”:
configure eaps eaps-1 name eaps-5
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
old_name Specifies the current name of an EAPS domain.
new_name Specifies a new name for the EAPS domain.