Extreme Networks ExtremeWare XOS - Show Bgp Routes

BGP Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1780
show bgp routes
show bgp routes {address-family [ipv4-unicast | ipv4-multicast]} {detail}
[all
| as-path <path-expression>
| community [no-advertise | no-export | no-export-subconfed
| number <community_num> | <AS_Num>:<Num>
]
| network [any / <netMaskLen> | <networkPrefixFilter>] {exact}
]
Description
Displays the BGP route information base (RIB).
Syntax Description
Default
If no address family is specified, IPv4 unicast is the default.
Usage Guidelines
The option network any / <netMaskLen> will display all BGP routes whose mask length is equal to
or greater than
<maskLength>, irrespective of their network address.
The option
network any / <netMaskLen> exact will display all BGP routes whose mask length is
exactly equal to
<maskLength>, irrespective of their network address.
address-family The address family. BGP supports two address families: IPv4 Unicast and IPv4
Multicast.
all Specifies all routes.
no-advertise Specifies the no-advertise community attribute.
no-export Specifies the no-export community attribute.
no-export-subconfed Specifies the no-export-subconfed community attribute.
community_num Specifies a community number.
AS_Num Specifies an autonomous system ID (0-65535).
Num Specifies the BGP community number.
any Specifies all routes with a given or larger mask length.
netMaskLen Specifies a subnet mask length (number of bits).
networkPrefixFilter Specifies an IP address and netmask.
exact Specifies an exact match with the IP address and subnet mask.