Extreme Networks ExtremeWare XOS - Configure Iproute Delete Blackhole

IP Unicast Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1344
configure iproute delete blackhole
configure iproute delete blackhole [<ipNetmask> | <ipaddress> <mask>] {vr
<vrname>}
Description
Deletes a blackhole address from the routing table.
Syntax Description
Default
If you do not specify a virtual router, the current virtual router context is used.
Usage Guidelines
None.
Example
The following command removes a blackhole address from the routing table:
configure iproute delete blackhole 100.101.145.4
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ipNetmask Specifies an IP address/mask length.
ipaddress Specifies an IP address.
mask Specifies a netmask.
vrname Specifies the virtual router to which the route is deleted.