Commands for Configuring Slots and Ports on a Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
414
unconfigure slot
unconfigure slot <slot>
Description
Clears a slot of a previously assigned module type.
Syntax Description
Default
N/A.
Usage Guidelines
If you issue the unconfigure slot command on a slot containing a module with any ports configured
for software-controlled redundancy, this command wipes away all software-controlled redundancy on
both ports; both ports return to normal. Refer to ExtremeWare XOS Concepts Guide for more information
on software-controlled redundant ports.
Example
The following command clears slot 4 of a previously assigned module type:
unconfigure slot 4
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available only on modular switches.
slot Specifies a slot on a modular switch.
To Next Page
Loading...