Security Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1036
show vlan dhcp-config
show vlan <vlan_name> dhcp-config
Description
Displays the DHCP server's configuration for the specified VLAN.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command displays the configuration of the DHCP server for the VLAN corp:
show vlan corp dhcp-config
The following is sample output from this command:
DHCP Address Range : 10.0.0.2->10.0.0.20
DHCP Lease Timer : Not configured (Default = 7200 seconds)
Default Gateway : 10.0.0.1
DNS Server : 10.0.0.80
WINS Server : 10.0.0.80
Ports DHCP Enabled : 1:1
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
vlan_name Specifies the VLAN of the DHCP server of interest.
To Next Page
Loading...