show ports configuration
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
389
show ports configuration
show ports {mgmt | <port_list>} configuration {no-refresh}
Description
Displays port configuration statistics, in real time or snapshot.
Syntax Description
Default
Real-time statistics.
Usage Guidelines
If you do not specify a port number or range of ports, configuration statistics are displayed for all ports.
If you specify the
no-refresh parameter, the system displays a snapshot of the data at the time you
issue the command.
This status information may be useful for your technical support representative if you have a network
problem.
This command displays port configuration, which includes:
● Virtual router
● Port state
● Autonegotiation information
● Link state
● Link speed
● Duplex mode
● Flow control
● Load sharing information
● Link media information
NOTE
On 10 Gbps ports, the Media Primary column displays NONE when no module is installed, and SR, LR, or ER
depending on the module installed when there is one present.
mgmt Specifies the management port.
port_list Specifies one or more ports or slots and ports.
no-refresh Specifies a static snapshot of data.
To Next Page
Loading...