enable clear-flow
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1103
enable clear-flow
enable clear-flow
Description
Enable the CLEAR-Flow agent.
Syntax Description
This command has no arguments or variables.
Default
CLEAR-Flow is disabled by default.
Usage Guidelines
When the CLEAR-Flow agent is enabled, sampling begins and actions are taken based on the CLEAR-
Flow rules that are configured on the switch.
Example
The following example enables CLEAR-Flow on the switch:
enable clear-flow
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on the BlackDiamond 10808 and BlackDiamond 12804 platforms only.
To Next Page
Loading...