Extreme Networks ExtremeWare XOS - Configure Dns-Client Add

Commands for Accessing the Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
66
configure dns-client add
configure dns-client add [domain-suffix <domain_name> | name-server
<ip_address> {vr <vr_name>}]
Description
Adds a domain suffix to the domain suffix list or a name server to the available server list for the DNS
client.
Syntax Description
Default
N/A.
Usage Guidelines
NOTE
The BlackDiamond 8800 series switch (formerly known as Aspen) and the Summit X450 family of switches do not
support user-created VRs.
The domain suffix list can include up to six items. If the use of all previous names fails to resolve a
name, the most recently added entry on the domain suffix list will be the last name used during name
resolution. This command will not overwrite any exiting entries. If a null string is used as the last suffix
in the list, and all other lookups fail, the name resolver will attempt to look up the name with no suffix.
Up to eight DNS name servers can be configured. The default value for the virtual router used by the
DNS client option is VR-Default.
domain-suffix Specifies adding a domain suffix.
domain_name Specifies a domain name.
name-server Specifies adding a name server.
ip_address Specifies an IP address for the name server.
vr Specifies use of a virtual router.
NOTE: User-created VRs are not available on the BlackDiamond 8800 series
switch (formerly known as Aspen) or the Summit X450 family of switches.
vr_name Specifies a virtual router.