show ipstats ipv6
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1457
show ipstats ipv6
show ipstats ipv6 {vlan <name> | tunnel <tunnelname> | vr <vrname>}
Description
Displays IPv6 statistics for the CPU for the switch or for a particular VLAN.
Syntax Description
Default
N/A.
Usage Guidelines
This command only shows statistics of the CPU-handled packets. Not all packets are handled by the
CPU.
If you do not specify a virtual router, the command applies to the current virtual router.
Example
The following command displays IPv6 statistics for the VLAN accounting:
show ipstats ipv6 vlan accounting
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
name Specifies a VLAN name.
vrname Specifies a virtual router.
To Next Page
Loading...