Extreme Networks ExtremeWare XOS - Configure Mld Snooping Vlan Ports Add Static Router

configure mld snooping vlan ports add static router
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1871
configure mld snooping vlan ports add static router
configure mld snooping {vlan} <vlanname> ports <portlist> add static router
Description
Configures VLAN ports to forward the traffic from all multicast groups, even if no MLD joins have
been received on the port.
Syntax Description
Default
None.
Usage Guidelines
Use this command to forward all multicast groups to the specified VLAN ports. In effect, this command
emulates a multicast router attached to those ports. As long as the ports are configured with the static
entry, all available multicast traffic will be forwarded to those ports.
Example
The following command configures a static MLD entry so all multicast groups will be forwarded to
VLAN marketing on ports 2:1-2:4:
configure mld snooping marketing ports 2:1-2:4 add static router
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
vlanname Specifies a VLAN name.
portlist Specifies one or more ports or slots and ports. On a modular switch, it can be
a list of slots and ports. On a stand-alone switch, it can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8.