BGP Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1704
configure bgp neighbor source-interface
configure bgp neighbor [<remoteaddr> | all] source-interface [any |
ipaddress <ipAddr>]
Description
Changes the BGP source interface for TCP connections.
Syntax Description
Default
Any.
Usage Guidelines
The source interface IP address must be a valid IP address of any VLAN configured on the switch.
Example
The following command changes the BGP source interface to 10.43.55.10:
configure bgp neighbor 192.168.1.5 source-interface ipaddress 10.43.55.10
History
This command was first available in ExtremeWare XOS 10.1.
This command required an Advanced Core license in ExtremeWare XOS 11.1.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
remoteaddr Specifies an IP address of the BGP neighbor.
all Specifies all neighbors.
any Specifies any source interface.
ipAddr Specifies the IP address of a source interface.
To Next Page
Loading...