Extreme Networks ExtremeWare XOS - Configure Tacacs Shared-Secret

configure tacacs shared-secret
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
979
configure tacacs shared-secret
configure tacacs [primary | secondary] shared-secret {encrypted} <string>
Description
Configures the shared secret string used to communicate with the TACACS+ authentication server.
Syntax Description
Default
N/A.
Usage Guidelines
The secret must be the same between the client switch and the TACACS+ server.
The
encrypted keyword is primarily for the output of the show configuration command, so the
shared secret is not revealed in the command output. Do not use it to set the shared secret.
Example
The following command configures the shared secret as “purplegreen” on the primary TACACS+
server:
configure tacacs-accounting primary shared-secret purplegreen
History
This command was first available in ExtremeWare XOS 10.1.
The
encrypted keyword was added in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
primary Configures the authentication string for the primary TACACS+ server.
secondary Configures the authentication string for the secondary TACACS+ server.
encrypted Indicates that the string is already encrypted.
string The string to be used for authentication.