Extreme Networks ExtremeWare XOS - Show Dos-Protect

Security Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1022
show dos-protect
show dos-protect {detail}
Description
Displays DoS protection configuration and state.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to display the DoS protection settings. Using the detail option will also display the
following cumulative statistics:
● trusted
● notify
● alerts
Example
The following command displays the DoS protection settings for the switch:
show dos-protect
The following is sample output from this command:
dos-protect is disabled
dos-protect settings:
interval: 1 (measurement interval secs)
acl expire time: 5 (secs)
trusted ports:
no trusted ports configured
type L3-Protect:
notify threshold: 3500 (level to log a message)
alert threshold: 4000 (level to generate an ACL)
detail Specifies to display statistics in addition to configuration and state.