show dos-protect
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1023
The following command displays detailed DoS protection settings for the switch:
show dos-protect detail
The following is sample output from this command:
dos-protect is enabled
dos-protect settings:
interval: 1 (measurement interval secs)
acl expire time: 5 (secs)
trusted ports:
1:2
type L3-Protect:
notify threshold: 3500 (level to log a message)
alert threshold: 4000 (level to generate an ACL)
dos-protect statistics:
trusted: 1301
notify: 0
alerts: 0
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...