ACL Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
846
show access-list configuration
show access-list configuration
Description
Displays the ACL configuration. Currently only the state of refresh blackhole is displayed.
Syntax Description
There are no arguments or variables for this command.
Default
N/A.
Usage Guidelines
This command displays the state of the ACL refresh blackhole, set by the enable access-list
refresh blackhole
command.
Example
The following command displays state of the ACL configuration:
show access-list configuration
The output from this command is similar to:
Access-list Refresh Blackhole: Enabled
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...