Commands for Managing the Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
214
show snmpv3 context
show snmpv3 context
Description
Displays information about the SNMPv3 contexts on the switch.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines:
This command displays the entries in the View-based Access Control Model (VACM) context table
(VACMContextTable).
Example
The following command displays information about the SNMPv3 contexts on the switch:
show snmpv3 context
The following is sample output from this command:
VACM Context Name :
Note : This Version Supports one global context ("")
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...