configure vlan netlogin-lease-timer
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1071
configure vlan netlogin-lease-timer
configure vlan <vlan name> netlogin-lease-timer <seconds>
Description
Configures the timer value returned as part of the DHCP response for clients attached to network login-
enabled ports.
Syntax Description
Default
10 seconds.
Usage Guidelines
The timer value is specified in seconds.
This command applies only to the web-based authentication mode of network login.
Example
The following command sets the timer value to 15 seconds for VLAN corp:
configure vlan corp netlogin-lease-timer 15
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on all platforms.
vlan name Specifies the VLAN to which this timer value applies.
seconds Specifies the timer value, in seconds.
To Next Page
Loading...