OSPF Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1602
show ospf virtual-link
show ospf virtual-link {<router-identifier> <area-identifier>}
Description
Displays virtual link information about a particular router or all routers.
Syntax Description
Default
N/A.
Usage Guidelines
area-identifier—Transit area used for connecting the two end-points. The transit area cannot have an
area identifier of 0.0.0.0 and cannot be a stub or NSSA area.
Example
The following command displays virtual link information about a particular router:
show ospf virtual-link 1.2.3.4 10.1.6.1
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
router-identifier Specifies a router interface number.
area-identifier Specifies an OSPF area.
To Next Page
Loading...