Extreme Networks ExtremeWare XOS - Show Rip Routes

show rip routes
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1499
show rip routes
show rip routes {detail} {network <ripNetworkPrefix>}
Description
Displays routes advertised by RIP.
Syntax Description
Default
N/A.
Usage Guidelines
The routes displayed include all routes advertised by RIP, including routes exported from the system
routing table and originated by other protocols, for example BGP.
Example
The following command displays a summary of RIP specific routes for the networks 10.0.0.0/8:
show rip routes network 10.0.0.0/8
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
detail Displays all available information from the RIP routing table.
ripNetworkPrefix Specifies the route prefix for the routes to show.