Extreme Networks ExtremeWare XOS - Enable Udp-Echo-Server

IP Unicast Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1396
enable udp-echo-server
enable udp-echo-server {vr <vrid>}{udp-port <port>}
Description
Enables UDP echo server support.
Syntax Description
Default
Disabled.
Usage Guidelines
UDP Echo packets are used to measure the transit time for data between the transmitting and receiving
end.
Example
The following command enables UDP echo server support:
enable udp-echo-server
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
port Specifies the UDP port.
vr Specifies the virtual router.