Extreme Networks ExtremeWare XOS - Configure Esrp Elrp-Premaster-Poll Disable

configure esrp elrp-premaster-poll disable
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1263
configure esrp elrp-premaster-poll disable
configure esrp <esrpDomain> elrp-premaster-poll disable
Description
Disables the use of ELRP by ESRP in the pre-master state.
Syntax Description
Default
Disabled.
Usage Guidelines
Use this command to disable the use of ELRP by ESRP in the pre-master state. When you disable ELRP
in the pre-master state, the ESRP pre-master switch no longer transmits ELRP PDUs to detect network
loops prior to changing to the master state.
Example
The following command disables the use of ELRP in the pre-master state on the ESRP domain elrp1:
configure esrp elrp1 esrp elrp-premaster poll disable
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on all platforms.
esrpDomain Specifies an ESRP domain name.