Network Login Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1076
disable netlogin
disable netlogin [{dot1x} {mac} {web-based}]
Description
Disables Network Login modes.
Syntax Description
Default
All types of authentication are disabled.
Usage Guidelines
Any combination of authentication types can be disabled on the same switch. To enable an
authentication mode, use the following command:
enable netlogin [{dot1x} {mac} {web-based}]
Example
The following command disables Network Login:
disable netlogin
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on all platforms.
dot1x Specifies 802.1x authentication.
mac Specifies MAC-based authentication.
web-based Specifies web-based authentication.
To Next Page
Loading...