VLAN Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
724
configure bvlan add svlan
configure bvlan <bvlan-name> add svlan <svlan-name>
Description
Adds the specified SVLAN to the specified BVLAN.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to add SVLANs to the BVLAN.
A BVLAN may have multiple SVLANs. An SVLAN can be in only one BVLAN and must have a unique
service ID within that BVLAN.
NOTE
When you add an SVLAN to a BVLAN, they cannot have overlapping ports. You cannot have the same ports on a
specific SVLAN that you add to a specific BVLAN.
Example
The following command adds the SVLAN white to the BVLAN black:
configure bvlan black add svlan white
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available only on the BlackDiamond 10808 and 12804 switch.
bvlan-name Enter the name of the BVLAN to which you are adding a SVLAN.
svlan-name Enter the name of the SVLAN you are adding to the specified BVLAN.
To Next Page
Loading...