Security Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
986
configure vlan dhcp-lease-timer
configure vlan <vlan_name> dhcp-lease-timer <lease-timer>
Description
Configures the timer value in seconds returned as part of the DHCP response.
Syntax Description
Default
N/A.
Usage Guidelines
The timer value is specified in seconds. The timer value range is 0 - 4294967295, where 0 indicates the
default (not configured) value of 7200 second.
Example
The following command configures the DHCP lease timer value for VLAN corp:
configure vlan corp dhcp-lease-timer <lease-timer>
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
name Specifies the VLAN on whose ports netlogin should be disabled.
lease-timer Specifies the timer value, in seconds.
To Next Page
Loading...