show igmp snooping vlan filter
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1849
show igmp snooping vlan filter
show igmp snooping {vlan} <name> filter
Description
Displays IGMP snooping filters.
Syntax Description
Default
None.
Usage Guidelines
Use this command to display IGMP snooping filters configured on the specified VLAN. When no
VLAN is specified, all the filters will be displayed.
Example
The following command displays the IGMP snooping filter configured on VLAN vlan101:
show igmp snooping vlan101 filter
The output of the command will be similar to the following:
Filter Port Flags
igmppermit0 5:10 a
Flags: (a) Active
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
name Specifies a VLAN name.
To Next Page
Loading...