EasyManua.ls Logo

Extreme Networks ExtremeWare XOS - Configure Iproute Delete Default

Extreme Networks ExtremeWare XOS
2024 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IP Unicast Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1346
configure iproute delete default
configure iproute delete default <gateway> {vr <vrname>}
Description
Deletes a default gateway from the routing table.
Syntax Description
Default
If you do not specify a virtual router, the current virtual router context is used.
Usage Guidelines
Default routes are used when the router has no other dynamic or static route to the requested
destination. A default gateway must be located on a configured IP interface.
Example
The following command deletes a default gateway:
configure iproute delete default 123.45.67.1
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
gateway Specifies a VLAN gateway.
vrname Specifies the virtual router to which the route is deleted.

Table of Contents

Related product manuals