Commands for Configuring Slots and Ports on a Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
392
show ports information
show ports {mgmt | <port_list>} information {detail}
Description
Displays detailed system-related information.
Syntax Description
Default
N/A.
Usage Guidelines
This command displays information, including the following:
● Port number
● Port configuration
■ Virtual router
■ Type of port
■ Admin state
■ Link state and speed
■ Link counter
■ VLAN configuration
■ STP configuration
■ Trunking, or load sharing
■ EDP
■ ELSM (disabled; or if enabled, the ELSM link state is shown as well)
■ Load balancing
■ Learning
■ Egress flooding
■ Jumbo frames
■ QoS profiles
■ vMAN status
■ Smart Redundancy status
■ SRP status
■ Additional platform-specific information
mgmt Specifies the management port.
port_list Specifies one or more ports of slots and ports.
detail Specifies detailed port information.
To Next Page
Loading...