configure iparp max_entries
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1335
configure iparp max_entries
configure iparp max_entries <max_entries>
Description
Configures the maximum allowed IP ARP entries.
Syntax Description
Default
4096.
Usage Guidelines
Range: 1 - 20480. The maximum IP ARP entries include dynamic, static, and incomplete IP ARP
entries.
Example
The following command sets the maximum IP ARP entries to 2000 entries:
configure iparp max-entries 2000
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
max_entries Specifies a number of maximum IP ARP entries.
To Next Page
Loading...