Extreme Networks ExtremeWare XOS - Configure Esrp Add Track-Vlan

configure esrp add track-vlan
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1247
configure esrp add track-vlan
configure esrp <esrpDomain> add track-vlan <vlan_name>
Description
Configures an ESRP domain to track port connectivity to a specified VLAN.
Syntax Description
Default
Disabled.
Usage Guidelines
The track-vlan metric is derived from the total number of active physical ports on the VLAN being
tracked by the ESRP domain.
If more than one VLAN shares a physical link, each VLAN counts the physical link.
The ESRP switch should have a higher priority number than its neighbors to ensure master election.
An ESRP domain can track one VLAN, and the tracked VLAN should not be a member of any other
ESRP domain in the system.
Example
The following command enables ESRP domain esrp1 to track port connectivity to VLAN engineering:
configure esrp esrp1 add track-vlan engineering
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
esrpDomain Specifies an ESRP domain name.
vlan_name Specifies the VLAN to be tracked.