enable ospf use-ip-router-alert
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1591
enable ospf use-ip-router-alert
enable ospf use-ip-router-alert
Description
Enables the generation of the OSPF router alert IP option.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
None.
Example
The following command enables the OSPF router alert IP option:
enable ospf use-ip-router-alert
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...