clear ospf counters
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1537
clear ospf counters
clear ospf counters
{ interfaces [all | vlan <vlan-name> | area <area-identifier>]
| area [all | <area-identifier>]
| virtual-link [all | <router-identifier> <area-identifier>]
| neighbor [all | routerid [<ip-address> {<ip-mask>} | <ipNetmask>]
| vlan <vlan-name>]
| system
}
Description
Clears the OSPF counters (statistics).
Syntax Description
Default
N/A.
Usage Guidelines
The global command clear counters also clears all OSPF counters. This global command is the
equivalent of
clear ospf counters for OSPF.
Example
The following command clears the OSPF counters for area 1.1.1.1:
clear ospf counters area 1.1.1.1
History
This command was first available in ExtremeWare XOS 10.1.
vlan-name Specifies a VLAN name.
router-identifier Specifies a router interface number.
area-identifier Specifies an OSPF area.
ip-address Specifies an IP address
ip-mask Specifies a subnet mask.
ipNetmask Specifies IP address / Netmask
system Specifies the OSPF system counters.
To Next Page
Loading...