Extreme Networks ExtremeWare XOS - Configure Account Password-Policy Min-Length

configure account password-policy min-length
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
61
configure account password-policy min-length
configure account [all | <name>] password-policy min-length
[<num_characters> | none]
Description
Requires a minimum number of characters for passwords.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to configure a minimum length restriction for all passwords for specified accounts.
This command affects the minimum allowed length for the next password; the current password is
unaffected.
The minimum password length is configurable from 1 to 32 characters. Using the
none option disables
the requirement of minimum password length and returns the system to the default state (password
minimum is 0 by default).
NOTE
If the account is configured to require a specific password format, the minimum is 8 characters. See configure
account password-policy char-validation for more information.
all Specifies all accounts (and future users).
name Specifies an account name.
num_characters Specifies the minimum number of characters required for the password. The
range is 1 to 32 characters.
NOTE: If you configure the configure account password-policy
char-validation parameter, the minimum length is 8 characters.
none Resets password to accept a minimum of 0 characters.
NOTE: If you configure the configure account encrypted parameter,
the minimum length is 8 characters.