Extreme Networks ExtremeWare XOS - Show Access-List Usage Acl-Mask

ACL Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
854
show access-list usage acl-mask
show access-list usage acl-mask port <port>
Description
Displays the number of ACL masks consumed by the ACLs on a particular port.
Syntax Description
Default
N/A.
Usage Guidelines
The BlackDiamond 8800 original series modules and Summit X450 series switches have a total of sixteen
ACL masks per port on the switch. To avoid exhausting the masks available on the switch, you must
carefully plan your use of ACL masks.
Use this command to display how many masks are currently consumed on a port.
Example
The following example displays the ACL mask usage on port 1:1:
show access-list usage acl-mask port 1:1
The output of this command is similar to the following:
Used: 3 Available: 12
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available only on the BlackDiamond 8800 family and Summit X450 family switches.
port Specifies to display the usage on this port.