show ipconfig
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1403
show ipconfig
show ipconfig {ipv4} {vlan <vlan_name>}
Description
Displays configuration information for one or more VLANs.
Syntax Description
Default
N/A.
Usage Guidelines
If no VLAN information is specified, then global IP configuration is displayed. Otherwise, specific
VLAN(s) information will be displayed. Global IP configuration information includes:
● IP address/netmask/etc.
● IP forwarding information / IP multicast forwarding information
● VLAN name and VLANID
● ICMP configuration (global)
● IRDP configuration (global)
● Maximum ECMP gateways—Summit X450 and BlackDiamond 8800 family only
Example
The following command displays configuration information on a VLAN named accounting:
show ipconfig vlan accounting
History
This command was first available in ExtremeWare XOS 10.1.
The ipv4 keyword was added in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
vlan_name Specifies a VLAN name.
To Next Page
Loading...