configure account
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
49
configure account
configure account [all | <name>]
Description
Configures a password for the specified account, either user account or administrative account.
Syntax Description
Default
N/A.
Usage Guidelines
You must create a user or administrative account before you can configure that account with a
password. Use the
create account command to create a user account.
The system prompts you to specify a password after you enter this command. You must enter a
password for this command; passwords cannot be null.
NOTE
Once you issue this command, you cannot have a null password. However, if you want to have a null password (that
is, no password on the specified account), use the create account command.
Passwords can have a minimum of 0 character and can have a maximum of 32 characters. Passwords
are case-sensitive; user names are not case-sensitive.
NOTE
If the account is configured to require a specific password format, the minimum is 8 characters. See configure
account password-policy char-validation for more information.
You must have administrator privileges to change passwords for accounts other than your own.
all Specifies all accounts (and future users).
name Specifies an account name.
To Next Page
Loading...