disable bgp neighbor
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1745
disable bgp neighbor
disable bgp neighbor [<remoteaddr> | all]
Description
Disables the BGP session.
Syntax Description
Default
Disabled.
Usage Guidelines
After the session has been disabled, all the information in the route information base (RIB) for the
neighbor is flushed.
Example
The following command disables the BGP session:
disable bgp neighbor 192.1.1.17
History
This command was first available in ExtremeWare XOS 10.1.
This command required an Advanced Core license in ExtremeWare XOS 11.1.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
remoteaddr Specifies an IP address of the BGP neighbor.
all Specifies all neighbors.
To Next Page
Loading...