Power Over Ethernet Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
508
clear inline-power stats ports
clear inline-power stats ports [all | <port_list>]
Description
Clears the inline statistics for the selected port to zero.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to clear all the information displayed by the show inline-power stats ports
<port_list>
command.
Example
The following command clears the inline statistics for ports 1-8 on slot 3 on a modular switch:
clear inline-power stats ports 3:1-3:8
The following command displays cleared inline power configuration information for ports 1-8 in slot 3:
show inline-power stats ports 3:1-3:8
Following is sample output from this command:
STATISTICS COUNTERS
Port State Class Absent InvSig Denied OverCurrent Short
3:1 delivering class3 0 0 0 0 0
3:2 delivering class3 0 0 0 0 0
3:3 searching class0 0 0 0 0 0
3:4 searching class0 0 0 0 0 0
3:5 searching class0 0 0 0 0 0
3:6 searching class0 0 0 0 0 0
3:7 searching class0 0 0 0 0 0
3:8 searching class0 0 0 0 0 0
History
This command was first available in ExtremeWare XOS 11.1.
all Specifies all ports.
port_list Specifies one or more ports or slots and ports.
To Next Page
Loading...