IP Unicast Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1414
unconfigure iparp
unconfigure iparp
Description
Resets the following to their default values:
● IP ARP timeout
● max ARP entries
● max ARP pending entries
● ARP checking
● ARP refresh
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
None.
Example
The following command resets IP ARP timeout to its default value:
unconfigure iparp
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...