configure ospf area interarea-filter
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1547
configure ospf area interarea-filter
configure ospf area <area-identifier> interarea-filter [<policy-map> |
none]
Description
Configures a global inter-area filter policy.
Syntax Description
Default
N/A.
Usage Guidelines
For switches configured to support multiple OSPF areas (an ABR function), a policy can be applied to
an OSPF area that filters a set of OSPF inter-area routes from being sourced from any other areas.
Example
The following command configures an inter-area filter policy, nosales:
configure ospf area 0.0.0.6 interarea-filter nosales
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
area-identifier Specifies the OSPF target area.
policy-map Specifies a policy.
none Specifies not to apply an interarea filter.
To Next Page
Loading...