Extreme Networks ExtremeWare XOS - Show Ospfv3

show ospfv3
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1647
show ospfv3
show ospfv3 {domain <domainName>}
Description
Displays global OSPFv3 information.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command displays global OSPFv3 information:
show ospfv3
The following is sample output:
OSPF Domain Name : OSPF-Default
OSPF : Enabled RouterId : 20.0.0.1
RouterId Selection : Automatic ASBR : Yes
ABR : Yes ExtLSAs : 3
ExtLSAChecksum : 0x19420 OriginateNewLSAs : 37
ReceivedNewLSAs : 12 SpfHoldTime : 10s
Num of Areas : 5 10M Cost : 100
100M Cost : 50 1000M Cost (1G) : 40
10000M Cost (10G) : 20 Router Alert : Disabled
ASExternal LSALimit : Disabled Timeout (Count) : Disabled (0)
Originate Default : Disabled
Import Policy File : none
Redistribute:
Protocol Status Cost Type Tag Policy
direct Disabled 20 2 0 none
ripng Disabled 20 2 0 none
static Enabled 20 2 0 IPv6
History
This command was first available in ExtremeWare XOS 11.2.
domainName Specifies an OSPFv3 domain. OSPF-Default is the only one currently
supported.