Extreme Networks ExtremeWare XOS - Disable Esrp

ESRP Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1288
disable esrp
disable esrp {<esrpDomain>}
Description
Disables ESRP for a named domain or for the entire switch.
Syntax Description
Default
Disabled for the entire switch.
Usage Guidelines
If you do not specify a domain name, ESRP is disabled for the entire switch.
If you disable an ESRP domain, the switch notifies its neighbor that the ESRP domain is going down,
and the neighbor clears its neighbor table. If the master switch receives this information, it enters the
neutral state to prevent a network loop. If the slave switch receives this information, it enters the
neutral state.
Example
The following command disables ESRP for the entire switch:
disable esrp
The following command disables ESRP for the domain esrp1:
disable esrp esrp1
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
esrpDomain Specifies the name of an ESRP domain.