show policy
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
825
show policy
show policy {<policy-name> | detail}
Description
Displays the specified policy.
Syntax Description
Default
If no policy name is specified, all policies are shown
Usage Guidelines
Use this command to display which clients are using the specified policy. The detail option displays the
rules that make up the policy.
Example
The following example displays the policy zone5:
show policy zone5
History
This command was available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
policy-name Specifies the policy to display.
detail Show the policy in detail.
To Next Page
Loading...