Extreme Networks ExtremeWare XOS - Configure Neighbor-Discovery Cache Delete

configure neighbor-discovery cache delete
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1431
configure neighbor-discovery cache delete
configure neighbor-discovery cache delete {vr <vr_name>} [<ipv6address> |
<scoped_link_local>]
Description
Deletes a static entry from the neighbor cache.
Syntax Description
Default
If you do not specify a virtual router, the current virtual router context is used.
Usage Guidelines
This command deletes static entries from the neighbor cache.
Example
The following command deletes a static entry from the neighbor cache:
configure neighbor-discovery cache delete fe80::2315
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
vr_name Specifies a virtual router.
ipv6address Specifies an IPv6 address.
scoped_link_local Specifies a scoped, link-local address.